Click on the image to check the artwork
By certification 
Introduction
T30080 is composed of various lubricant additives, including high-quality detergent, antioxidant, , etc. It has excellent performance of anti-oxidation and corrosion resistance, wear resistance, excellent and lasting reduction of oil mud, paint film and carbon deposition, and prolongs the service life of oil. It can reduce noise and boost power. The requirements of SM, SN, ACEA A3/B4, ILSAC GF-5 can be met by the combination of suitable viscosity index improver and group II, III or IV base oil.
Â
Recommended Treat Rate
Performance Level | Treat Rate (wt%) |
SM | 8.0 |
SN | 9.0 |
ACEA A3/B4 | 11.0 |
Â
Specifications
Item | Typical Value | Test Method |
Kinematic Viscosity (100℃), mm 2/s | Report | GB/T 265 |
Flash Point (COC), ℃ | ＞ 110 | GB/T 3536 |
Calcium, wt% | 2.95 | ASTM D5185 (ICP) |
Zinc, wt% | 1.03 | ASTM D5185 (ICP) |
Phosphorus, wt% | 0.85 | ASTM D5185 (ICP) |
Boron, wt% | 0.10 | ASTM D5185 (ICP) |
Molybdenum, wt% | 0.12 | ASTM D5185 (ICP) |
Nitrogen, wt% | 0.81 | SH/T 0224 |
TBN, mgKOH/g | 95 | SH/T 0251 |
Â
Package, Handle & Storage
1. Packed in 200L metal drum, IBC-Tank or made to order.
2. Long term storage temperature should not exceed 45℃.
3. Handle & blending temperature should not exceed 65℃.
4. Not dangerous chemical, store in dry & clean warehouse.
Â
http://www.cnlubricantadditive.com/
